Overview Introduction
2410 Pellet Receiver
The 2410 pellet receiver is designed to handle pellets as well as regrind or granular materials. Its modular design offers flexibility in selecting the material construction, power requirements, filtration system, receiver inlet configurations, and discharge type—allowing you to meet both your current application needs and future requirements. The 2410 receiver is available in two versions: one optimized for continuous conveying applications, and the other tailored for loss-in-weight (LIW) feeder refill systems. Depending on the specific application and the material being handled, users can choose from a variety of discharge valve types, including gravity, slide, and butterfly valves. Receivers intended for keep-full applications are equipped with a gravity gate discharge valve. These receivers initiate material-drawing cycles as long as the inductive proximity switch on the gravity discharge gate remains nearly closed—or until a signal is detected from a secondary level indicator located in the hopper—ensuring that the hopper below the receiver stays fully loaded at all times.
- Design
- Conveying Rates
- Technical Data
- Dimensions
- Options
-
- Commodity name: 2410 Pellet Receiver
- Commodity ID: 1440650979970797568
The 2410 pellet receiver is designed to handle pellets as well as regrind or granular materials. Its modular design offers flexibility in selecting the material construction, power requirements, filtration system, receiver inlet configurations, and discharge type—allowing you to meet both your current application needs and future requirements. The 2410 receiver is available in two versions: one optimized for continuous conveying applications, and the other tailored for loss-in-weight (LIW) feeder refill systems. Depending on the specific application and the material being handled, users can choose from a variety of discharge valve types, including gravity, slide, and butterfly valves. Receivers intended for keep-full applications are equipped with a gravity gate discharge valve. These receivers initiate material-drawing cycles as long as the inductive proximity switch on the gravity discharge gate remains nearly closed—or until a signal is detected from a secondary level indicator located in the hopper—ensuring that the hopper below the receiver stays fully loaded at all times.
The 2410 receiver is available in either aluminum (painted) or stainless steel construction. Components of different constructions are interchangeable, allowing receivers to be specified with stainless steel material contact areas only.
Central system units for the 2410 receivers use a common vacuum blower package and are primarily employed in multi-destination applications requiring higher conveying rates or longer distances.
Mechanical Features
• Rugged modular design
• Quick-connect clamps for easy cleaning and filter maintenance
• Full-support discharge flange for mounting
Controls
The receiver is available with controls suitable for use either with a solid-state microprocessor controller (MPC) or a programmable logic controller (PLC). Both control systems operate on 24 VDC low voltage and come with installation kits that simplify and make the setup more cost-effective. The receiver controls feature color-coded quick connectors and enable communication with the central controller. For single-receiver applications, we offer the LSR Controller. In loss-in-weight feeder refill applications, the LSR Controller integrates seamlessly with feeder controls.Download Product Specification Sheets
Video: 2410 Pellet Receiver
Need further assistance?
-
Based on a distance of 15 m [50 ft] and a bulk density of 0.5 kg/dm³ [31 lb/ft³]. Rates vary depending on material properties, conveying distance, and plant layout.
Pellet Receiver
• Up to 1,180 kg/h [2,600 lb/h]Download Product Specification Sheets
Video: 2410 Pellet Receiver
Need further assistance?
-
Standard Mechanical Specifications
• Available in painted RAL 7035 gray aluminum or 1.4301 (AISI 304) stainless steel construction
• Holding capacity: full version—11.7 dm³ [0.41 ft³]; LIW refill version—9.7 dm³ [0.34 ft³]
• 254 mm [10 in] diameter housing
• Up to 50.8 mm [2 in] tangential inlet with a stainless steel check valve
• Stainless steel band clamps
• Integral fill valve with backside vent, dual-acting air cylinder featuring solenoid control 24 VDC
• Discharge gate valve
• Keep full version: One-piece aluminum or stainless steel 127 mm [5 in] gravity gate discharge with a white Neoprene seal and an inductive proximity switch level-sensing system (24 VDC) mounted on the gravity gate
• LIW feeder refill version: Butterfly or slide gate valve; equipped with a single-coil solenoid (energize to open the valve). Standard Filtration Specifications
• Perforated filter element for pelletsStandard Electrical Specifications
• Signal voltage 24 VDC
Weights
• Aluminum: full version weighs 15 kg [32 lb], LIW refill version weighs 23 kg [50 lb]
• Stainless Steel: standard version weighs 23 kg [50 lb], LIW refill version weighs 36 kg [80 lb]
Operating Temperature
• -10 to 50°C [14 to 122°F]Download Product Specification Sheets
Video: 2410 Pellet Receiver
Need further assistance?
-
Download Product Specification Sheets
Video: 2410 Pellet Receiver
Need further assistance?
-
Mechanical
• Mounting bracket for LIW feeder refill versions
• Bead-blasted surface finish (1.8-micron Ra)
• Flange for alternative discharge gate valve
• PTFE membrane on filter elements
• Weatherproof for outdoor use
• Custom material combinations
• Reduced inlet tube size to accommodate smaller-capacity applications
• Vibrator as a discharge aid
• Aeration pads as discharge aids
• Enclosure for solenoidsElectrical
• Mounting bracket for terminal box or controller
• Level probes (capacitive or tuning fork type)
• Limit switches on butterfly or slide gate valve
• LSR Controller
• Central Microprocessor or PLC Control
• Stainless steel options available for solenoids, gauges as required
• Solenoid boxes supplied loose, available in mild or stainless steel finish
• Terminal box mounted in mild or stainless steel finish
• CSA or UL-certified solenoidsDownload Product Specification Sheets
Video: 2410 Pellet Receiver
Need further assistance?
The 2410 receiver is available in either aluminum (painted) or stainless steel construction. Components of different constructions are interchangeable, allowing receivers to be specified with stainless steel material contact areas only.
Central system units for the 2410 receivers use a common vacuum blower package and are primarily employed in multi-destination applications requiring higher conveying rates or longer distances.
Mechanical Features
• Rugged modular design
• Quick-connect clamps for easy cleaning and filter maintenance
• Full-support discharge flange for mounting
Controls
The receiver is available with controls suitable for use either with a solid-state microprocessor controller (MPC) or a programmable logic controller (PLC). Both control systems operate on 24 VDC low voltage and come with installation kits that simplify and make the setup more cost-effective. The receiver controls feature color-coded quick connectors and enable communication with the central controller. For single-receiver applications, we offer the LSR Controller. In loss-in-weight feeder refill applications, the LSR Controller integrates seamlessly with feeder controls.
Download Product Specification Sheets
Video: 2410 Pellet Receiver
Need further assistance?
Previous page
Next page
Previous page
Next page
Address: No.69 Yong Hong Road, Hongqiao Green Valley Plaza, Block G, 4th Floor, Rooms 4065/4131, Minhang District, Shanghai 201106
Copyright © 2025 Shanghai Xieke Mechanical & Electrical Equipment System Engineering Co., Ltd.
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Steco Process Equipment & Systems Co., Ltd.
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry, no matching items were found.
CSS / JS 文件放置地