Overview Introduction
2424 Pellet Receiver
The 2424 pellet receiver features a high-capacity sequencing system designed to handle pellets, as well as regrind and granular materials. It is ideally suited for applications such as silo-to-day transfer, in-plant material handling, or railcar unloading—capable of processing up to 6,800 kg/hr [15,000 lb/h]. The 2424 receiver comes in two versions: one optimized for continuous full-conveying operations, and the other tailored for loss-in-weight (LIW) feeder refill applications. Depending on the specific application and the material being fed, users can choose from a variety of discharge valve types, including gravity-operated or butterfly valves. Receivers intended for keep-full applications are equipped with a gravity gate discharge valve. When the material level in the storage hopper drops below the level indicator, the receiver automatically signals to start drawing material. The filling sequence continues until the material level in the hopper rises above the indicator.
- Product Description
- Conveying Rates
- Technical Data
- Dimensions
- Options
-
- Commodity name: 2424 Pellet Receiver
- Commodity ID: 1440650983460458496
The 2424 pellet receiver features a high-capacity sequencing system designed to handle pellets, as well as regrind and granular materials. It is ideally suited for applications such as silo-to-day transfer, in-plant material handling, or railcar unloading—capable of processing up to 6,800 kg/hr [15,000 lb/h]. The 2424 receiver comes in two versions: one optimized for continuous full-conveying operations, and the other tailored for loss-in-weight (LIW) feeder refill applications. Depending on the specific application and the material being fed, users can choose from a variety of discharge valve types, including gravity-operated or butterfly valves. Receivers intended for keep-full applications are equipped with a gravity gate discharge valve. When the material level in the storage hopper drops below the level indicator, the receiver automatically signals to start drawing material. The filling sequence continues until the material level in the hopper rises above the indicator.
The 2424 receiver is available in either carbon steel (painted) or stainless-steel construction. Each receiver includes a stainless-steel check valve, enabling multiple receivers to draw material from a shared conveying line. The 2424 pellet receiver features a perforated screen filter section. Central system units for the 2424 receivers use a common vacuum blower package and are primarily designed for multi-destination applications requiring higher conveying rates or longer distances.
Mechanical Features
• Rugged modular design
• Quick-connect clamps for easy cleaning and filter maintenance
• Full-support discharge flange for mounting
Controls
The receiver is available with controls designed for use either with a solid-state microprocessor controller (MPC) or a programmable logic controller (PLC). Both control systems operate on 24 VDC low voltage and come bundled with installation kits, ensuring easy and cost-effective setup. The receiver controls feature color-coded quick connectors and enable seamless communication with the central controller. For single-receiver applications, we offer the LSR Controller. In loss-in-weight feeder refill applications, the LSR Controller integrates effortlessly with the Feeder controls.Download Product Specification Sheets
Didn’t find what you were looking for?
-
Based on a distance of 15 m [50 ft] and a bulk density of 0.5 kg/dm³ [31 lb/ft³]. Rates vary depending on material characteristics, conveying distance, and plant layout.
Pellet Receiver
• Up to 6,800 kg/h [15,000 lb/h]Download Product Specification Sheets
Didn’t find what you were looking for?
-
Standard Mechanical Specifications
• Available in carbon steel with a painted primer interior and a painted RAL 7035 gray exterior, or in 1.4301 (AISI 304) stainless steel construction
• Holding capacity: full version retains 134 dm³ [4.74 ft³], LIW refill version holds 106 dm³ [3.74 ft³]
• 559 mm [22 in] diameter housing
• Up to 102 mm [4 in] tangential inlet with stainless steel check valve assembly
• Stainless steel band clamps
• Integral fill valve with backside vent, dual-acting air cylinder featuring solenoid control 24 VDC
• Discharge gate valve
• Keep full version: One-piece stainless steel 254 mm [10 in] gravity gate discharge with a white Neoprene seal
• LIW feeder refill version: Butterfly gate valve; equipped with a single-coil solenoid (energize to open the valve)Standard Filtration Specifications
• Perforated filter element for pellets
Standard Electrical Specifications
• Signal voltage 24 VDC
Weights
• Full version: 65 kg [144 lb] | LIW refill version: 114 kg [250]
Operating Temperature
• -10 to 50°C [14 to 122°F]Download Product Specification Sheets
Didn’t find what you were looking for?
-
Download Product Specification Sheets
Didn’t find what you were looking for?
-
Mechanical
• Mounting bracket for LIW feeder refill versions
• Flange for discharge gate valve (volume capacity 130 dm³ [4.6 ft³]); other volumes available upon request
• Weatherproof for outdoor use
• Custom material combinations
• Reduced inlet tube size to accommodate smaller-capacity applications
• Vibrator as a discharge aid
• Aeration pads as discharge aids
• Enclosure for solenoidsElectrical
• Mounting bracket for terminal box or controller
• Level probes (capacitive or tuning fork type)
• Limit switches for butterfly or slide gate valves
• LSR controller
• Central Microprocessor or PLC control
• Stainless steel options available for solenoids and gauges as required
• Solenoid boxes supplied loose, available in mild or stainless steel finish
• Terminal box mounted in mild or stainless steel finish
• CSA- or UL-certified solenoidsDownload Product Specification Sheets
Didn’t find what you were looking for?
The 2424 receiver is available in either carbon steel (painted) or stainless-steel construction. Each receiver includes a stainless-steel check valve, enabling multiple receivers to draw material from a shared conveying line. The 2424 pellet receiver features a perforated screen filter section. Central system units for the 2424 receivers use a common vacuum blower package and are primarily designed for multi-destination applications requiring higher conveying rates or longer distances.
Mechanical Features
• Rugged modular design
• Quick-connect clamps for easy cleaning and filter maintenance
• Full-support discharge flange for mounting
Controls
The receiver is available with controls designed for use either with a solid-state microprocessor controller (MPC) or a programmable logic controller (PLC). Both control systems operate on 24 VDC low voltage and come bundled with installation kits, ensuring easy and cost-effective setup. The receiver controls feature color-coded quick connectors and enable seamless communication with the central controller. For single-receiver applications, we offer the LSR Controller. In loss-in-weight feeder refill applications, the LSR Controller integrates effortlessly with the Feeder controls.
Download Product Specification Sheets
Didn’t find what you were looking for?
Previous page
Previous page
Next page
Address: No.69 Yong Hong Road, Hongqiao Green Valley Plaza, Block G, 4th Floor, Rooms 4065/4131, Minhang District, Shanghai 201106
Copyright © 2025 Shanghai Xieke Mechanical & Electrical Equipment System Engineering Co., Ltd.
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Steco Process Equipment & Systems Co., Ltd.
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry, no matching items were found.
CSS / JS 文件放置地