Side Access Filter Receiver-Steco Process Equipment & Systems Co., Ltd.

Language
- English
- Chinese

Overview Introduction

Side Access Filter Receiver

The Side Access Filter Receiver enables material-to-air separation during vacuum or pressurized conveying of products in pellet, granular, and powder forms. It is commonly used when side access to filters is critical, allowing maintenance personnel to replace the filters without entering the product area—and where height restrictions make it impractical to use top-load filters.

Design
Technical Data
Options
Model Specifications
Dimensions

- Commodity name: Side Access Filter Receiver
- Commodity ID: 1440651002959777792
The Side Access Filter Receiver enables material-to-air separation during vacuum or pressurized conveying of products in pellet, granular, and powder forms. It is commonly used when side access to filters is critical, allowing maintenance personnel to replace the filters without entering the product area—and where height restrictions make it impractical to use top-load filters.

The unit’s filter element is cleaned using reverse-jet cleaning from a compressed-air accumulator. Compressed air is directed through Venturi nozzles, creating a powerful airflow that effectively dislodges dust particles for thorough cleaning of the filter element. Filter elements are pulsed in groups at a time, while the remaining elements continue to operate online. The interval between pulsing cycles is adjustable, ensuring optimal cleaning performance. Incoming material is filtered by a cleanable spunbond polyester substrate equipped with an FDA-approved ePTFE membrane. Available in both carbon steel and stainless steel construction materials.

Features
• Lower overall height compared to top-load filters
• Replace the filters without entering the product area
• A unique top material inlet on the receiver helps reduce concerns about can velocity
• Steep hopper slope helps facilitate material flow for hard-to-handle materials
Controls
• The air pulse cleaning of the filter elements is regulated by the timer control panel. The timer controls the remote pilot valves and allows for easy adjustment of both the frequency and duration of each pulse.

Download Product Specification Sheets

DOWNLOAD

Video: Side Access Filter Receiver

Have more questions?

CONTACT US
Standard Mechanical Specifications
• Sizes 813 mm [32 in], 1067 mm [42 in], and 1219 mm [48 in] in diameter
• Material of construction:
• Carbon steel construction, with non-contact surfaces painted in RAL 7035 gray
• Stainless steel DIN 1.4301 [AISI 304] material contact construction, with welds polished to a 1.6 μm Ra surface finish on the interior and 6.3 μm Ra on the exterior; non-contact surfaces are painted RAL 7035 gray.
• Filter housing with a 70° hopper and a 254 mm [10 in] ANSI-drilled flanged discharge
• Material tube inlet and exhaust diameter: 102 mm [4 in] on the 32-in. model, and 152 mm [6 in] on the 42-in. and 48-in. models
• Helix tube filter cartridges are made of 100% spunbond polyester with ePTFE.
• 813 mm [32 in] unit: 5.1 m² [55.2 ft²] total filter area
• 1067 mm [42 in] unit: 8.5 m² [92 ft²] total filter area
• 1219 mm [48 in] unit: 17.1 m² [184 ft²] total filter area
• Mounting brackets
• Threaded coupler for level control
• Tool-free access door with ergonomic handles

Operating Temperature
• Ambient limits: -20 to 80°C [-4 to 176°F]
• Maximum product limit: 121°C [250°F]
Operating Pressure
• Housing limits pressure from 69 mbar(g) [1 psi(g)] down to 541 mbar(g) [16 in Hg] vacuum
Standard Electrical Specifications
• Cleaning timer control panel featuring an IP66, NEMA 4 die-cast aluminum enclosure and operating on 24 VDC
• Remote pilot valve panel featuring an IP67, NEMA 4 die-cast aluminum 4-inch enclosure and 24 VDC 15 W coils
Weights
• 813 mm [32 in] unit: 286 kg [630 lb]
• 1067 mm [42 in] unit: 420 kg [925 lb]
• 1219 mm [48 in] unit: 640 kg [1410 lb]

Download Product Specification Sheets

DOWNLOAD

Video: Side Access Filter Receiver

Have more questions?

CONTACT US
Mechanical Options
• Various construction materials and weld finishes available upon request
• Various discharge arrangements
• Oleophobic filter media
Electrical Options
• 120 VAC

Hazardous Location Options
• Explosion-proof NEMA 7 or 9 construction
• Explosion venting or suppression
• NEC - Class I, Div. 1, Groups C & D
• NEC - Class II, Div. 1, Groups E, F & G
Accessories
• Support stand and service platform
• Level switch (for hopper level)
• Pressure differential indicator
• Flow aids

Download Product Specification Sheets

DOWNLOAD

Video: Side Access Filter Receiver

Have more questions?

CONTACT US
Download Product Specification Sheets

DOWNLOAD

Video: Side Access Filter Receiver

Have more questions?

CONTACT US
Download Product Specification Sheets

DOWNLOAD

Video: Side Access Filter Receiver

Have more questions?

CONTACT US

The unit’s filter element is cleaned using reverse-jet cleaning from a compressed-air accumulator. Compressed air is directed through Venturi nozzles, creating a powerful airflow that effectively dislodges dust particles for thorough cleaning of the filter element. Filter elements are pulsed in groups at a time, while the remaining elements continue to operate online. The interval between pulsing cycles is adjustable, ensuring optimal cleaning performance. Incoming material is filtered by a cleanable spunbond polyester substrate equipped with an FDA-approved ePTFE membrane. Available in both carbon steel and stainless steel construction materials.

Features
• Lower overall height compared to top-load filters
• Replace the filters without entering the product area
• A unique top material inlet on the receiver helps reduce concerns about can velocity
• Steep hopper slope helps facilitate material flow for hard-to-handle materials
Controls
• The air pulse cleaning of the filter elements is regulated by the timer control panel. The timer controls the remote pilot valves and allows for easy adjustment of both the frequency and duration of each pulse.