Overview Introduction
2410 Venturi Powder Loader
The 2410 Venturi powder loader is designed to handle fine bulk materials. The Venturi power unit uses compressed air to generate a vacuum-based conveying system. Thanks to its modular design, the loader offers flexibility in selecting the material construction, power source, filtration system, and discharge type, ensuring it meets your current application needs—and any future requirements as well. The 2410 Venturi loader comes in two versions: one optimized for continuous full-conveying applications, and the other tailored for loss-in-weight (LIW) feeder refill systems. Depending on the specific application and the material being handled, users can choose from a variety of discharge valve types, including gravity-operated, slide/orifice, or butterfly valves. Loaders intended for keep-full applications are equipped with a gravity gate discharge valve. These loaders operate by drawing material in cycles, provided that the inductive proximity switch on the gravity discharge gate remains nearly closed—or until a signal is detected from a secondary level indicator located in the hopper. This ensures the hopper beneath the loader stays consistently full.
- Design
- Technical Data
- Mechanical Option
- Electrical Option
- Dimensions
-
- Commodity name: 2410 Venturi Powder Loader
- Commodity ID: 1440650985138180096
The 2410 Venturi powder loader is designed to handle fine bulk materials. The Venturi power unit uses compressed air to generate a vacuum-based conveying system. Thanks to its modular design, the loader offers flexibility in selecting the material construction, power source, filtration system, and discharge type, ensuring it meets your current application needs—and any future requirements as well. The 2410 Venturi loader comes in two versions: one optimized for continuous full-conveying applications, and the other tailored for loss-in-weight (LIW) feeder refill systems. Depending on the specific application and the material being handled, users can choose from a variety of discharge valve types, including gravity-operated, slide/orifice, or butterfly valves. Loaders intended for keep-full applications are equipped with a gravity gate discharge valve. These loaders operate by drawing material in cycles, provided that the inductive proximity switch on the gravity discharge gate remains nearly closed—or until a signal is detected from a secondary level indicator located in the hopper. This ensures the hopper beneath the loader stays consistently full.
2410 Venturi loaders are available in either aluminum (painted) or stainless steel construction. Components from the different constructions are interchangeable, enabling loaders to be specified with stainless steel material contact areas only.
Mechanical Features
• Rugged modular design
• Quick-connect clamps for easy cleaning and filter maintenance
• Full-support discharge flange for mountingControls
The 2410 Venturi loader is equipped with the LSR Controller. The front-panel controls include a potentiometer for setting the draw time and an on/off switch. Even on the most basic loader, these controls are designed to accommodate future add-on options, such as pulse-clean powder filters. The control system is powered by a 15-amp, 115/230 VAC, single-phase, grounded panel.
Conveying Rates
Based on granular powder at a distance of 6 m [20 ft] and bulk density
of 0.5 kg/dm³ [31 lb/ft³]. Rates vary depending on material properties,
Conveying distance and plant layout. Up to 225 kg/h [500 lb/h]Download Product Specification Sheets
Video: 2410 Venturi Powder Loader
Need more information about the 2410 Venturi Powder Loader?
-
Standard Mechanical Specifications
• Available in painted RAL 7035 gray aluminum or 1.4301 (AISI 304) stainless steel construction
• Provides power for LSR: 115/230 VAC, 15 Amp, with automatic switching
• Venturi supply air: 5.5 - 6.9 bar(g) [80 - 100 psi(g)]
• Venturi air consumption: 53 m³/h at 6 bar(g) [31 scfm at 87 psi(g)]
• Holding capacity, standard conveying version: 11.7 dm³ [0.41 ft³]
• Holding capacity, LIW refill version: 9.7 dm³ [0.34 ft³]
• 254 mm [10 in] diameter housing
• 38 mm [1.5 in] tangential inlet
• Stainless steel band clamps
• Discharge gate valve
• Keep full version: One-piece stainless steel 127 mm [5 in] discharge gate featuring a white Neoprene seal and an inductive proximity switch for level-sensing system (24 VDC) on the gravity gate
• LIW feeder refill version: Butterfly or slide/orifice gate valve; equipped with a single-coil solenoid (energize to open the valve)
• Automatic reverse jet cleaning with a 1.7 dm³ [.06 ft³] air reservoir; maximum pressure of 6.9 bar [100 psig]Standard Filtration Configuration
• 454 g [16 oz] polyester cloth filter bag with snap-ring seal for powder loader, offering a total filter area of 0.37 m² [4 ft²]
Weights
• Aluminum: 23 kg [50 lb], depending on discharge configuration
• Stainless Steel: 45 kg [100 lb], depending on the discharge configuration
Operating Temperature
• -10 to 50°C [14 to 122°F]Download Product Specification Sheets
Video: 2410 Venturi Powder Loader
Need more information about the 2410 Venturi Powder Loader?
-
• Flange for alternative discharge gate valve
• PTFE membrane on filter elements
• Custom material combinations
• Mounting bracket for LIW feeder refill versions
• Bead-blasted surface finish (1.8-micron Ra)
• Venturi vacuum pump sound enclosureDownload Product Specification Sheets
Video: 2410 Venturi Powder Loader
Need more information about the 2410 Venturi Powder Loader?
-
• Level probes (capacitive or tuning fork type)
• Limit switches for butterfly or slide gate valves
• For NEC- and ATEX-compliant options, please contact the factory.
• For CSA or UL-certified solenoid contact manufacturerDownload Product Specification Sheets
Video: 2410 Venturi Powder Loader
Need more information about the 2410 Venturi Powder Loader?
-
Download Product Specification Sheets
DOWNLOAD
Video: 2410 Venturi Powder Loader
Need more information about the 2410 Venturi Powder Loader?
2410 Venturi loaders are available in either aluminum (painted) or stainless steel construction. Components from the different constructions are interchangeable, enabling loaders to be specified with stainless steel material contact areas only.
Mechanical Features
• Rugged modular design
• Quick-connect clamps for easy cleaning and filter maintenance
• Full-support discharge flange for mounting
Controls
The 2410 Venturi loader is equipped with the LSR Controller. The front-panel controls include a potentiometer for setting the draw time and an on/off switch. Even on the most basic loader, these controls are designed to accommodate future add-on options, such as pulse-clean powder filters. The control system is powered by a 15-amp, 115/230 VAC, single-phase, grounded panel.
Conveying Rates
Based on granular powder at a distance of 6 m [20 ft] and bulk density
of 0.5 kg/dm³ [31 lb/ft³]. Rates vary depending on material properties,
Conveying distance and plant layout. Up to 225 kg/h [500 lb/h]
Download Product Specification Sheets
Video: 2410 Venturi Powder Loader
Need more information about the 2410 Venturi Powder Loader?
Previous page
Previous page
Next page
Address: No.69 Yong Hong Road, Hongqiao Green Valley Plaza, Block G, 4th Floor, Rooms 4065/4131, Minhang District, Shanghai 201106
Copyright © 2025 Shanghai Xieke Mechanical & Electrical Equipment System Engineering Co., Ltd.
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Steco Process Equipment & Systems Co., Ltd.
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry, no matching items were found.
CSS / JS 文件放置地