Overview Introduction
2420 Powder Receiver
Application
The 2420 receiver is designed to handle free-flowing granular, powdered, regrind, pelletized materials, and PVC compounds. It features a large filter area with automatic cleaning capabilities, making it ideal for fine powders, and wear-resistant carbon steel (or optional stainless steel) contact areas that ensure reliable conveying of mildly abrasive materials.
The 2420 receiver comes in two versions: one optimized for continuous material conveyance, and the other tailored for loss-in-weight (LIW) feeder refill applications. Depending on the specific application and the material being fed, users can choose from a variety of discharge valve types, including gravity, orifice, and butterfly valves.
For keep-full applications, the receiver is equipped with a gravity gate discharge valve. This system initiates material-drawing cycles as long as the inductive proximity switch on the gravity discharge gate remains nearly closed—or until a signal is detected from a secondary level indicator located in the hopper—thereby ensuring that the hopper below the receiver stays fully loaded at all times.
- Design
- Conveying Rates
- Technical Data
- Dimensions
- Options
-
- Commodity name: 2420 Powder Receiver
- Commodity ID: 1440650974753083392
Application <br/> The 2420 receiver is designed to handle free-flowing granular, powdered, regrind, pelletized materials, and PVC compounds. It features a large filter area with automatic cleaning capabilities, making it ideal for fine powders, and wear-resistant carbon steel (or optional stainless steel) contact areas that ensure reliable conveying of mildly abrasive materials. The 2420 receiver comes in two versions: one optimized for continuous material conveyance, and the other tailored for loss-in-weight (LIW) feeder refill applications. Depending on the specific application and the material being fed, users can choose from a variety of discharge valve types, including gravity, orifice, and butterfly valves. For keep-full applications, the receiver is equipped with a gravity gate discharge valve. This system initiates material-drawing cycles as long as the inductive proximity switch on the gravity discharge gate remains nearly closed—or until a signal is detected from a secondary level indicator located in the hopper—thereby ensuring that the hopper below the receiver stays fully loaded at all times.
The receiver features a low overall height, thanks to its design that incorporates a cyclonic primary separator paired with an internal cartridge secondary separator equipped with automatic air-pulse cleaning. It’s available in carbon steel construction with an epoxy-coated interior and an enamel-painted exterior, or with 1.4301 (AISI 304) stainless steel material in contact with the product. A tangential material inlet tube ensures gentle material entry, minimizing degradation of the conveyed product, and includes an internal check valve that enables the receiver to be used in vacuum sequencing systems featuring multiple receivers.
Mechanical Features
• Low overall height
• Rugged modular design
• Quick-connect clamps for easy cleaning and filter maintenance
• Full-support discharge flange for mounting
Controls
The receiver is available with controls suitable for use either with a solid-state microprocessor controller (MPC) or a programmable logic controller (PLC). Both control systems operate on 24 VDC low voltage and come with installation kits that simplify and make the setup more cost-effective. The receiver controls feature color-coded quick connectors and enable communication with the central controller. For single-receiver applications, we offer the LSR Controller. In loss-in-weight feeder refill applications, the LSR Controller integrates seamlessly with feeder controls.Download Product Specification Sheets
Video: 2420 Powder Receiver
Want to learn more about the 2420 Powder Receiver?
-
Based on a distance of 15 m [50 ft] and a bulk density of 0.5 kg/dm³ [31 lb/ft³]. Rates vary depending on material characteristics and conveying distance.
and plant layout.
Powder Receiver
• Up to 1225 kg/hr [2700 lb/hr]Download Product Specification Sheets
Video: 2420 Powder Receiver
Want to learn more about the 2420 Powder Receiver?
-
Standard Mechanical Specifications
• Available in carbon steel with a painted primer interior and a painted RAL 7035 gray exterior, or in 1.4301 (AISI 304) stainless steel construction
• Holding capacity: full version holds 33 dm³ [1.16 ft³], LIW refill version holds 19.8 dm³ [0.7 ft³]
• 610 mm [24 in] diameter housing
• 76.2 mm [3 in] tangential inlet with stainless steel check valve
• 60° sloped hopper to facilitate material discharge
• Stainless steel band clamps
• Integral fill valve with backside vent, dual-acting air cylinder featuring solenoid control 24 VDC
• Discharge gate valve
• Keep full version: One-piece 150 mm [6 in] stainless steel gravity gate discharge with a white Neoprene seal and an inductive proximity switch level-sensing system (24 VDC) integrated into the gravity gate
• LIW feeder refill version: Butterfly or orifice gate valve; equipped with a single-coil solenoid (energize to open the valve)
• Automatic self-cleaning cartridge assembly
• Automatic reverse jet cleaning with a 9 dm³ (0.3 ft³) air reservoir; max. 6.9 bar(g) [100 psi(g)]Standard Filtration Specifications
• 100% spunbond polyester cartridge filters, including black gaskets—1 filter, totaling 2.89 m² [31.1 ft²] of filter area
Standard Electrical Specifications
• Signal voltage 24 VDC
Weights
• Keep the full version at 61 kg [135 lb]
• LIW refill version 116 kg [255 lb]
Operating Temperature
• -10 to 50°C [14 to 122°F]Download Product Specification Sheets
Video: 2420 Powder Receiver
Want to learn more about the 2420 Powder Receiver?
-
Download Product Specification Sheets
Video: 2420 Powder Receiver
Want to learn more about the 2420 Powder Receiver?
-
Mechanical
• Mounting bracket for LIW feeder refill versions
• Bead-blasted surface finish (1.8-micron Ra)
• Flange for alternative discharge gate valve
• PTFE membrane on filter elements
• Weatherproof for outdoor use
• Custom material combinations
• Reduced inlet tube size to accommodate smaller-capacity applications
• Vibrator as a discharge aid
• Aeration pads as discharge aids
• Enclosure for solenoidsElectrical
• Mounting bracket for terminal box or controller
• Level probes (capacitive or tuning fork type)
• Limit switches for butterfly or slide gate valves
• LSR Controller
• Central Microprocessor or PLC Control
• Stainless steel options available for solenoids and gauges, as required
• Solenoid boxes supplied loose in mild or stainless steel finish
• Terminal box mounted in mild or stainless steel finish
• CSA or UL-certified solenoids
Hazardous Locations
• NEC Contact FactoryDownload Product Specification Sheets
Video: 2420 Powder Receiver
Want to learn more about the 2420 Powder Receiver?
The receiver features a low overall height, thanks to its design that incorporates a cyclonic primary separator paired with an internal cartridge secondary separator equipped with automatic air-pulse cleaning. It’s available in carbon steel construction with an epoxy-coated interior and an enamel-painted exterior, or with 1.4301 (AISI 304) stainless steel material in contact with the product. A tangential material inlet tube ensures gentle material entry, minimizing degradation of the conveyed product, and includes an internal check valve that enables the receiver to be used in vacuum sequencing systems featuring multiple receivers.
Mechanical Features
• Low overall height
• Rugged modular design
• Quick-connect clamps for easy cleaning and filter maintenance
• Full-support discharge flange for mounting
Controls
The receiver is available with controls suitable for use either with a solid-state microprocessor controller (MPC) or a programmable logic controller (PLC). Both control systems operate on 24 VDC low voltage and come with installation kits that simplify and make the setup more cost-effective. The receiver controls feature color-coded quick connectors and enable communication with the central controller. For single-receiver applications, we offer the LSR Controller. In loss-in-weight feeder refill applications, the LSR Controller integrates seamlessly with feeder controls.
Download Product Specification Sheets
Video: 2420 Powder Receiver
Want to learn more about the 2420 Powder Receiver?
Previous page
Next page
Previous page
Next page
Address: No.69 Yong Hong Road, Hongqiao Green Valley Plaza, Block G, 4th Floor, Rooms 4065/4131, Minhang District, Shanghai 201106
Copyright © 2025 Shanghai Xieke Mechanical & Electrical Equipment System Engineering Co., Ltd.
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Steco Process Equipment & Systems Co., Ltd.
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry, no matching items were found.
CSS / JS 文件放置地