Overview Introduction
2423 Powder Receiver
The 2423 vacuum receiver features a high-capacity sequencing system designed to handle powders, pellets, regrinds, and granular materials. It is recommended for applications such as loading feeders, silo-to-daybin transfers, in-plant material transfers, or railcar unloading—capable of processing up to 1,406 kg/hr [3,100 lb/hr].
The 2423 receiver is available in two versions, designed for either general keep-full conveying or loss-in-weight (LIW) feeder refill applications. It offers a selection of various discharge valve types—gravity, orifice, and butterfly—depending on the specific application and the material being fed. Receivers intended for keep-full applications are equipped with a gravity gate discharge valve. When the material level in the storage hopper drops below the level indicator, the receiver is triggered to start drawing material. The filling sequence continues until the material level in the hopper rises above the level indicator.
- Design
- Conveying Rates
- Technical Data
- Dimensions
- Options
-
- Commodity name: 2423 Powder Receiver
- Commodity ID: 1440650976468553728
The 2423 vacuum receiver features a high-capacity sequencing system designed to handle powders, pellets, regrinds, and granular materials. It is recommended for applications such as loading feeders, silo-to-daybin transfers, in-plant material transfers, or railcar unloading—capable of processing up to 1,406 kg/hr [3,100 lb/hr]. <br/> The 2423 receiver is available in two versions, designed for either general keep-full conveying or loss-in-weight (LIW) feeder refill applications. It offers a selection of various discharge valve types—gravity, orifice, and butterfly—depending on the specific application and the material being fed. Receivers intended for keep-full applications are equipped with a gravity gate discharge valve. When the material level in the storage hopper drops below the level indicator, the receiver is triggered to start drawing material. The filling sequence continues until the material level in the hopper rises above the level indicator.
The 2423 receiver is available in either carbon steel (painted) or stainless steel construction. Each receiver features a stainless steel check valve, enabling multiple receivers to draw material from a shared conveying line. The 2423 receiver incorporates a cartridge filter. Central system units for the 2423 receiver use a common vacuum blower package and are primarily designed for multi-destination applications requiring higher conveying rates or longer distances.
Mechanical Features
• Rugged modular design
• Quick-connect clamps for easy cleaning and filter maintenance
• Full-support discharge flange for mounting
Controls
The receiver is available with controls suitable for use either with a solid-state microprocessor controller (MPC) or a programmable logic controller (PLC). Both control systems operate on 24 VDC low voltage and come with installation kits that simplify and make the setup more cost-effective. The receiver controls feature color-coded quick connectors and enable communication with the central controller. For single-receiver applications, we offer the LSR Controller. In loss-in-weight feeder refill applications, the LSR Controller integrates seamlessly with feeder controls.Download Product Specification Sheets
Video: 2423 Vacuum Sequencing Central Powder Receiver
Not exactly what you're looking for?
-
Based on a distance of 15 m [50 ft] and a bulk density of 0.5 kg/dm³ [31 lb/ft³]. Rates vary depending on material characteristics, conveying distance, and plant layout.
Powder Receiver
• Up to 1,406 kg/hr [3,100 lb/hr]Download Product Specification Sheets
Video: 2423 Vacuum Sequencing Central Powder Receiver
Not exactly what you're looking for?
-
Standard Mechanical Specifications
• Available in carbon steel with a painted primer interior and a painted RAL 7035 gray exterior, or in 1.4301 (AISI 304) stainless steel construction
• Holding capacity: full version holds 70.8 dm³ [2.05 ft³], while the refill version accommodates 44 dm³ [1.55 ft³] of LIW
• 559 mm [22 in] diameter housing
• Up to 76.2 mm [3 in] tangential inlet with stainless steel check valve assembly
• Stainless steel band clamps
• Integral fill valve with backside vent, dual-acting air cylinder featuring solenoid control 24 VDC
• Discharge gate valve
• Keep full version: One-piece stainless steel 254 mm [10 in] gravity gate discharge with a white Neoprene seal
• LIW feeder refill version: Butterfly or orifice gate valve; equipped with a single-coil solenoid (energize to open the valve)
• Automatic reverse jet cleaning with a 5.7 dm³ (0.2 ft³) air reservoir; max 6.9 bar(g) [100 psi(g)]Standard Filtration Specifications
• 100% spunbond polyester pleated cartridge filter for powder, total
4.6 or 9.3 m² [50 or 100 ft²] filter area
Standard Electrical Specifications
• Signal voltage 24 VDC
Weights
• Keep the full version at 68 kg [150 lb]
• LIW refill version 112 kg [245 lb]
Operating Temperature
• -10 to 50°C [14 to 122°F]Download Product Specification Sheets
Video: 2423 Vacuum Sequencing Central Powder Receiver
Not exactly what you're looking for?
-
Download Product Specification Sheets
Video: 2423 Vacuum Sequencing Central Powder Receiver
Not exactly what you're looking for?
-
Mechanical
• Mounting bracket for LIW feeder refill versions
• Flange for alternative discharge gate valve
• Foam filter
• Weather hood for outdoor use
• Custom material combinations
• Reduced inlet tube size to accommodate smaller-capacity applications
• Vibrator as a discharge aid
• Aeration pads as discharge aids
• Enclosure for solenoidsElectrical
• Mounting bracket for terminal box or controller
• Level probes (capacitive or tuning fork type)
• Limit switches for butterfly or slide gate valves
• LSR Controller
• Central Microprocessor or PLC Control
• Stainless steel options available for solenoids, gauges as required
• Solenoid boxes supplied loose in mild or stainless steel finish
• Terminal box mounted in mild or stainless steel finish
• CSA- or UL-certified solenoids
Hazardous Locations
• NEC Contact FactoryDownload Product Specification Sheets
Video: 2423 Vacuum Sequencing Central Powder Receiver
Not exactly what you're looking for?
The 2423 receiver is available in either carbon steel (painted) or stainless steel construction. Each receiver features a stainless steel check valve, enabling multiple receivers to draw material from a shared conveying line. The 2423 receiver incorporates a cartridge filter. Central system units for the 2423 receiver use a common vacuum blower package and are primarily designed for multi-destination applications requiring higher conveying rates or longer distances.
Mechanical Features
• Rugged modular design
• Quick-connect clamps for easy cleaning and filter maintenance
• Full-support discharge flange for mounting
Controls
The receiver is available with controls suitable for use either with a solid-state microprocessor controller (MPC) or a programmable logic controller (PLC). Both control systems operate on 24 VDC low voltage and come with installation kits that simplify and make the setup more cost-effective. The receiver controls feature color-coded quick connectors and enable communication with the central controller. For single-receiver applications, we offer the LSR Controller. In loss-in-weight feeder refill applications, the LSR Controller integrates seamlessly with feeder controls.
Download Product Specification Sheets
Video: 2423 Vacuum Sequencing Central Powder Receiver
Not exactly what you're looking for?
Previous page
Next page
Previous page
Next page
Address: No.69 Yong Hong Road, Hongqiao Green Valley Plaza, Block G, 4th Floor, Rooms 4065/4131, Minhang District, Shanghai 201106
Copyright © 2025 Shanghai Xieke Mechanical & Electrical Equipment System Engineering Co., Ltd.
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Steco Process Equipment & Systems Co., Ltd.
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry, no matching items were found.
CSS / JS 文件放置地