P10 Receiver-Steco Process Equipment & Systems Co., Ltd.

Language
- English
- Chinese

Overview Introduction

P10 Receiver

The P10 Receiver is designed to handle powders and complies with the stringent 3A Dairy sanitary standards. Featuring a selection of different discharge valve types—such as powered flap valves and actively driven butterfly valves—the P10 can be used for both hopper-loading applications and loss-in-weight feeder refill tasks, where the receiver isn’t always emptied completely.

Product Description
Conveying Rates
Technical Data
Dimensions
Options

- Commodity name: P10 Receiver
- Commodity ID: 1440650962233085952
The P10 Receiver is designed to handle powders and complies with the stringent 3A Dairy sanitary standards. Featuring a selection of different discharge valve types—such as powered flap valves and actively driven butterfly valves—the P10 can be used for both hopper-loading applications and loss-in-weight feeder refill tasks, where the receiver isn’t always emptied completely.

The P10 receiver is available in two outlet configurations: powered flap valve (FP) or butterfly valve (BV). The receiver body is crafted from stainless steel DIN 1.4404 [AISI 316L], featuring an internally and externally electropolished, passivated surface. Its modular design and hygienic construction—free of pockets or dead spaces—facilitate effortless disassembly and cleaning, as well as straightforward expansion through the addition of extension modules. Additionally, Tri-Clover quick-release fittings enable rapid disconnection from conveying and vacuum piping systems. All units are equipped with reverse-jet filter cleaning for enhanced efficiency.
Mechanical Features
• Sanitary design for easy cleaning
• Rugged modular design
• Steep cone angles ensure excellent discharge
• Large-area reverse jet filter for efficient powder conveying
Controls
For single-receiver applications, we offer the LSR Controller. In loss-in-weight feeder refill applications, the LSR Controller can also be integrated with SmartConnex™ feeder controls. For systems with multiple receivers, microprocessor-based controls or a range of PLC control solutions are available, and these can also be seamlessly integrated into feeder control systems.

Download Product Specification Sheets

DOWNLOAD

Video: P10 Vacuum Sequencing Central Receiver

Is there anything else we can assist with?

CONTACT US
P10-FP-150 flap valve versions? 150 mm [6 in] up to 600 kg/h [1320 lb/h]
P10-BV-100/150 butterfly valve versions? 100 or 150 mm [4 or 6 in], up to 400 kg/h [880 lb/h]
Based on a distance of 15 m [50 ft] and a bulk density of 0.5 kg/dm³ [31 lb/ft³]. Rates vary depending on material properties, conveying distance, and plant layout.

Download Product Specification Sheets

DOWNLOAD

Video: P10 Vacuum Sequencing Central Receiver

Is there anything else we can assist with?

CONTACT US
Standard Mechanical Specifications
• Stainless steel DIN 1.4404 [AISI 316L] for parts in material contact
• Surface finish electropolished
• Welds continuously as laid
• Holding capacity: P10-FP-150 9.5 dm³ [0.34 ft³]; P10-BV-100/150 7.3 dm³ [0.26 ft³]
• Stainless steel band clamps
• Sealing and gaskets, FDA-listed food-grade materials:
Clamp ring: silicone, translucent
Tri-clamp: white silicone, FDA-approved
Flap valve: flap-bonded silicone sheet, translucent
Butterfly valve rubber sleeve: EPDM, black
• Convey line connections; spigots with tri-clamps, 38.1 mm [1.5 in], 50.8 mm [2 in]
• Integral fill valve with backside vent and tri-clamp for quick removal
• Vacuum line connection 50.8 mm [2 in]
• Discharge: Butterfly valve, ? DN 100 or 150 [4 or 6 in]; Power flap, ? 150 mm [6 in]
• 100% spunbond polyester pleated cartridge filter with stainless steel end caps; total area 0.25 m² [2.7 ft²]; length 200 mm [7.9 in]
• Automatic reverse jet filter, 2 dm³ [0.07 ft³] SS air reservoir; maximum 4 bar(g) [60 psi(g)]
• Material certificate EN 10204-2.1

Standard Electrical Specifications
• Signal voltage 24 VDC
Weights
• 15–20 kg [33–44 lb], depending on the discharge configuration
Operating Temperature
• -10 to 50°C [14 to 122°F] for indoor use only – not suitable for outdoor use

Download Product Specification Sheets

DOWNLOAD

Video: P10 Vacuum Sequencing Central Receiver

Is there anything else we can assist with?

CONTACT US
Download Product Specification Sheets

DOWNLOAD

Video: P10 Vacuum Sequencing Central Receiver

Is there anything else we can assist with?

CONTACT US
Mechanical
• 6 dm³ [0.2 ft³] extension module
• Slide gate valves as an alternative to butterfly-type valves
• PTFE-coated filter media
• Open pleated filter type for PTFE implementation
• Filter basket with GORE-TEX® fabric
• EPDM white rubber sleeve for butterfly valve
• Vibrator as a discharge aid
• Aeration pads as discharge aids
• Venturi vacuum pump
• LSR Controller
• Central microprocessor or PLC control
• CSA or UL-certified solenoids

Hazardous Locations
• NEC Contact Factory
• Stainless steel enclosure for solenoids and pressure regulators supplied loose
• Material certificates type EN10204-2.2 and EN 10204-3.1
Electrical
• Level probes (capacitive or tuning fork type)
• Terminal box mounted, featuring a painted aluminum or stainless steel finish
• ATEX (outdoor/indoor/discharge)
• with power flap: 3D / 1D / 2D
• with butterfly valve: 3D / 1D / 1D
EU-Type Examination Certificate SEV 17 ATEX 0149 X

Download Product Specification Sheets

DOWNLOAD

Video: P10 Vacuum Sequencing Central Receiver

Is there anything else we can assist with?

CONTACT US

The P10 receiver is available in two outlet configurations: powered flap valve (FP) or butterfly valve (BV). The receiver body is crafted from stainless steel DIN 1.4404 [AISI 316L], featuring an internally and externally electropolished, passivated surface. Its modular design and hygienic construction—free of pockets or dead spaces—facilitate effortless disassembly and cleaning, as well as straightforward expansion through the addition of extension modules. Additionally, Tri-Clover quick-release fittings enable rapid disconnection from conveying and vacuum piping systems. All units are equipped with reverse-jet filter cleaning for enhanced efficiency.
Mechanical Features
• Sanitary design for easy cleaning
• Rugged modular design
• Steep cone angles ensure excellent discharge
• Large-area reverse jet filter for efficient powder conveying
Controls
For single-receiver applications, we offer the LSR Controller. In loss-in-weight feeder refill applications, the LSR Controller can also be integrated with SmartConnex™ feeder controls. For systems with multiple receivers, microprocessor-based controls or a range of PLC control solutions are available, and these can also be seamlessly integrated into feeder control systems.