Overview Introduction
Pressure Vessel Conveying
The world’s most technologically advanced pneumatic system, the Ominveyor pressure vessel system combined with Air Injection Modules (AIM), offers single-point control of conveying air pressure and airflow along the entire length of the conveyor line—whether the rate and distance are small or large, or anywhere in between.
- Application
- Design
- Technical Data
- Options
- Dimensions
-
- Commodity name: Pressure Vessel Conveying
- Commodity ID: 1440650951332089856
The world’s most technologically advanced pneumatic system, the Ominveyor pressure vessel system combined with Air Injection Modules (AIM), offers single-point control of conveying air pressure and airflow along the entire length of the conveyor line—whether the rate and distance are small or large, or anywhere in between.
Pressure vessels are used in dense-phase pneumatic conveying applications and are suitable for premixed materials, materials with high bulk density, and products that are highly abrasive, friable, or prone to segregation. They are designed for high-capacity conveying rates and long-distance transport in both purged (clear-line) and non-purged (full-line) systems.
Download Product Specification Sheets
Video: Dense Phase Pressure Vessel
Didn’t find what you were looking for?
-
The dense-phase pressure vessels feature a robust design. They are available in either carbon steel (painted) or stainless-steel construction. The inlet and vent valves are the only moving parts in the entire assembly. Each vessel is manufactured to ASME or PED/CE standards, depending on the project location. The pressure vessel arrives fully assembled, factory-tested, and includes:
• Flanged inlet and vent adapter
• Inlet and vent valves with pneumatic actuator and proof switches, IP66 rated
• Compressed air inlet fitting
• Pressure relief valve
• Pressure transmitter
• High-level material probe IP66• Material low-level probe IP66 rated, for non-purge models only
• Integral aeration in the 60° vessel cone
• Access/inspection port
• Three support legs
• Couplings and assembly hardwareDownload Product Specification Sheets
Video: Dense Phase Pressure Vessel
Didn’t find what you were looking for?
-
Standard Features
• Available in painted RAL 7035 gray carbon steel or DIN 1.4301 (AISI 304) stainless steel construction
• Carbon steel units are designed for 6.9 bar(g) [100 psi(g)] at 104°C [220°F]
• Stainless steel units are designed for 6.9 bar(g) [100 psi(g)] at 104°C [220°F]Download Product Specification Sheets
Video: Dense Phase Pressure Vessel
Didn’t find what you were looking for?
-
• Hygienic design
• DIN 1.4404, 1.4435 (AISI 316L) stainless steel construction
• Quick-disconnect cabling for all instrumentation
• NEMA 7/9 or ATEX versions available upon request
• Aeration pads• Various inlet valve types and sizes
• Various vent valve types and sizes
• Load cells
• Outlet valve
• High temperatureDownload Product Specification Sheets
Video: Dense Phase Pressure Vessel
Didn’t find what you were looking for?
-
Download Product Specification Sheets
Video: Dense Phase Pressure Vessel
Didn’t find what you were looking for?
Pressure vessels are used in dense-phase pneumatic conveying applications and are suitable for premixed materials, materials with high bulk density, and products that are highly abrasive, friable, or prone to segregation. They are designed for high-capacity conveying rates and long-distance transport in both purged (clear-line) and non-purged (full-line) systems.
Download Product Specification Sheets
Video: Dense Phase Pressure Vessel
Didn’t find what you were looking for?
Previous page
Next page
Previous page
Next page
Address: No.69 Yong Hong Road, Hongqiao Green Valley Plaza, Block G, 4th Floor, Rooms 4065/4131, Minhang District, Shanghai 201106
Copyright © 2025 Shanghai Xieke Mechanical & Electrical Equipment System Engineering Co., Ltd.
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Steco Process Equipment & Systems Co., Ltd.
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry, no matching items were found.
CSS / JS 文件放置地