Overview Introduction
Wye Gate Diverting Valve
Diverting or converging materials in high-cycle applications—commonly used in storage filling and/or transfer operations. When employed in minimally abrasive applications or as an air directional valve, Wye Line Diverters often achieve more than 10 million cycles throughout their service life.
- Product Description
- DESIGN
- OPTION 1
- OPTION 2
- DIMENSIONS
-
- Commodity name: Wye Gate Diverting Valve
- Commodity ID: 1440651167623958528
Diverting or converging materials in high-cycle applications—commonly used in storage filling and/or transfer operations. When employed in minimally abrasive applications or as an air directional valve, Wye Line Diverters often achieve more than 10 million cycles throughout their service life.
1. Live Loaded, featuring compensating hard polymer pressure plate seals
2. The shimming system enables in-line maintenance
3. Machined, full-bore orifice designed for unobstructed material flow and to maintain convey line pressures
4. Can be shifted along a flowing column of materials
5. Positive seal of materials and dusts across the closed port(s) and into the atmosphere
6. Mechanically self-cleans its seals with each actuation
7. No pinch points or exposed moving parts for safety
8. No internal cavities to prevent wedging, lodging, and spoilage
9. Narrow profile for applications in limited spacesNeed help finding the right diverter valves?
-
Conveyance Type Gravity flow and dilute-phase pneumatic conveying applications. Capable of handling differential pressures up to 15 psig | 1 barg | 0.1 MPa, depending on the gate size. Can be used in both pressure and vacuum systems.
Materials Handled Non-abrasive to moderately abrasive powders, pellets, and granules. Modifications available for handling corrosive materials and/or for wash-down applications.
Standard Sizes 2-12 inch | 50–305 mm ID & OD diameters are available. Also available in schedule 10, 20, or 40 pipe sizes.
Inlet & Outlets Available in round sizes.Outlet Angle Options 30° or 45° from center Contact us for custom angles
Connection Options Compression couplings, ANSI #125/150Material Temperatures 180°F | 80°C for standard gate, with modifications allowing up to 400°F | 205°C
Body/Frame Options Aluminum, 304 or 316L stainless steel, carbon steel
Weldment Options Aluminum, 304 or 316L stainless steel, carbon steel
Material Contact Options Aluminum, 304 or 316L stainless steel, carbon steel
Pressure Plate Options Nylon, PET, UHMW, glass-filled PTFE
Load Seal Options Natural rubber and/or silicone rubber
Drive/Actuation Double-acting air cylinder, hand wheel/crank, chain wheel, electric actuator
Position Confirmation Magnetic reed, proximity, or mechanical limit switches, and/or a clear bonnet cover for visual indication
Other Options Ceramic backing, ceramic/epoxy coating, or reinforced inlet weldment, Sealed body air purge
Compliance ATEX Zone 20 (internal), ATEX Zone 21 (external), FDANeed help finding the right diverter valves?
-
Need help finding the right diverter valves?
-
S Material/metal contact is made of 316L stainless steel.
SL The diverter features a straight-through conveying line designed for easier "in-line" installation and reduced system pressure drop when using multiple diverters.
P10 Standard tube-size diverters are made using schedule 10 pipe throughout.
P40 Standard tube-size diverters are made using schedule 40 pipe throughout.
HT3 Modifications have been made to allow continuous operation up to 250°F (121°C) and intermittent service up to 300°F (149°C).
HT4 Modifications have been made to allow continuous operation up to 400°F (204°C) and intermittent service up to 450°F (232°C).
WS The gate blade is electropolished. Polyethylene (PET or UHMW) pressure plate seals are used as a replacement for nylon.
OF 45/30 Inlets and outlets are flanged with ANSI, DIN, or JIS connections. The outlet opposite the air cylinder is offset by 30 or 45 degrees.Need help finding the right diverter valves?
-
Need help finding the right diverter valves?
1. Live Loaded, featuring compensating hard polymer pressure plate seals
2. The shimming system enables in-line maintenance
3. Machined, full-bore orifice designed for unobstructed material flow and to maintain convey line pressures
4. Can be shifted along a flowing column of materials
5. Positive seal of materials and dusts across the closed port(s) and into the atmosphere
6. Mechanically self-cleans its seals with each actuation
7. No pinch points or exposed moving parts for safety
8. No internal cavities to prevent wedging, lodging, and spoilage
9. Narrow profile for applications in limited spaces
Need help finding the right diverter valves?
Previous page
Previous page
Next page
Address: No.69 Yong Hong Road, Hongqiao Green Valley Plaza, Block G, 4th Floor, Rooms 4065/4131, Minhang District, Shanghai 201106
Copyright © 2025 Shanghai Xieke Mechanical & Electrical Equipment System Engineering Co., Ltd.
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Steco Process Equipment & Systems Co., Ltd.
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry, no matching items were found.
CSS / JS 文件放置地