Overview Introduction
P100 Receiver
The P100 Receiver is designed to handle powders and complies with the stringent 3A Dairy sanitary standards. Featuring a selection of different discharge valve types—such as powered flap valves and actively driven butterfly valves—the P100 can be used for both hopper-loading applications and loss-in-weight feeder refill tasks, where the receiver isn’t always emptied completely.
- Product Description
- Conveying Rates
- Technical Data
- Dimensions
- Options
-
- Commodity name: P100 Receiver
- Commodity ID: 1440650965869547520
The P100 Receiver is designed to handle powders and complies with the stringent 3A Dairy sanitary standards. Featuring a selection of different discharge valve types—such as powered flap valves and actively driven butterfly valves—the P100 can be used for both hopper-loading applications and loss-in-weight feeder refill tasks, where the receiver isn’t always emptied completely.
The P100 receiver is available in two outlet configurations: powered flap valve (FP) or butterfly valve (BV). The receiver body is made of stainless steel DIN 1.4404 [AISI 316L], featuring an internally and externally electropolished, passivated surface. Its modular design and hygienic construction—free of pockets or dead spaces—enable effortless disassembly and cleaning, as well as straightforward expansion using extension modules. Additionally, Tri-Clover quick-release fittings ensure rapid disconnection from conveying and vacuum piping systems. All units are equipped with reverse-jet filter cleaning functionality.
Mechanical Features
• Sanitary design for easy cleaning
• Rugged modular design
• Steep cone angles ensure excellent discharge
• Large-area reverse jet filter for efficient powder conveying
Controls
For single-receiver applications, we offer the LSR Controller. In loss-in-weight feeder refill applications, the LSR Controller can also be interfaced with SmartConnex™ feeder controls. For systems with multiple receivers, microprocessor-based controls or a range of PLC control solutions are available, and these can also be integrated into feeder control systems.Download Product Specification Sheets
Video: P100 Vacuum Sequencing Central Receiver
Do you have any further questions?
-
P100-FP-300 flap valve version, Φ 300 mm [12 in], up to 4000 kg/h [8800 lb/h]
P100-BV-200 butterfly valve version, Φ 200 mm [8 in], up to 3600 kg/h [7920 lb/h]
Based on a distance of 15 m [50 ft] and a bulk density of 0.5 kg/dm³ [31 lb/ft³]. Rates vary depending on material properties, conveying distance, and plant layout.Download Product Specification Sheets
Video: P100 Vacuum Sequencing Central Receiver
Do you have any further questions?
-
Standard Mechanical Specifications
• Stainless steel DIN 1.4404 [AISI 316L] for parts in material contact
• Surface finish electropolished
• Welds continuously as laid
• Holding capacity: P100-FP-300 96.2 dm³ [3.4 ft³]
P100-BV-200 90.2 dm³ [3.2 ft³]
• Stainless steel band clamps
• Sealing and gaskets, FDA-listed food-grade materials:
Clamp ring: silicone, translucent
Tri-clamp: white silicone, FDA-approved
Flap valve: flap-bonded silicone sheet, translucent
Butterfly valve rubber sleeve: EPDM, black
• Facilitate line connections; spigots with Tri-clamps, 50.8 mm [2 in], 63.5 mm [2.5 in], 76.2 mm [3 in]
• Integral fill valve with backside vent and Tri-clamp for quick removal
• Vacuum line connection 76.2 [3 in]
• Discharge valve:
P100-BV-200 butterfly valve, ? DN 200 mm [8 in]
P100-FP-300 power flap valve, Ø 300 mm [12 in]
• 100% spunbond polyester pleated cartridge filters with stainless steel end caps, 6 filters in total, with a combined area of 3 m² [32.3 ft²]; length 400 mm [15.7 in]
• Automatic reverse jet filter, 4 dm³ [0.14 ft³] SS air reservoir; maximum 4 bar(g) [60 psi(g)]
• Material certificate EN 10204-2.1Standard Electrical Specifications
• Signal voltage 24 VDC
Weights
• P100, without options: 75 kg [165 lb]
Operating Temperature
• -10 to 50°C [14 to 122°F] for indoor use only – not suitable for outdoor applicationsDownload Product Specification Sheets
Video: P100 Vacuum Sequencing Central Receiver
Do you have any further questions?
-
Download Product Specification Sheets
Video: P100 Vacuum Sequencing Central Receiver
Do you have any further questions?
-
Mechanical
• 60 dm³ [2.12 ft³] extension module
• Slide gate valves as an alternative to butterfly-type valves
• PTFE-coated filter media
• Open pleated filter type for PTFE implementation
• Filter basket with GORE-TEX® fabric
• EPDM white rubber sleeve for butterfly valve
• Vibrator as a discharge aid
• Aeration pads as discharge aids
• Stainless steel enclosure for solenoids and pressure regulators supplied loose
• Material certificates type EN10204-2.1Electrical
• Level probes (capacitive or tuning fork type)
• Terminal box mounted, made of painted aluminum or stainless steel
steel finish
• LSR Controller
• Central microprocessor or PLC control
• CSA or UL-certified solenoids
Hazardous Locations
• NEC Contact Factory
• ATEX (outdoor/indoor/discharge)
• with power flap: 3D / 1D / 2D
• with butterfly valve: 3D / 1D / 1D
EU-Type Examination Certificate SEV 17 ATEX 0149 XDownload Product Specification Sheets
Video: P100 Vacuum Sequencing Central Receiver
Do you have any further questions?
The P100 receiver is available in two outlet configurations: powered flap valve (FP) or butterfly valve (BV). The receiver body is made of stainless steel DIN 1.4404 [AISI 316L], featuring an internally and externally electropolished, passivated surface. Its modular design and hygienic construction—free of pockets or dead spaces—enable effortless disassembly and cleaning, as well as straightforward expansion using extension modules. Additionally, Tri-Clover quick-release fittings ensure rapid disconnection from conveying and vacuum piping systems. All units are equipped with reverse-jet filter cleaning functionality.
Mechanical Features
• Sanitary design for easy cleaning
• Rugged modular design
• Steep cone angles ensure excellent discharge
• Large-area reverse jet filter for efficient powder conveying
Controls
For single-receiver applications, we offer the LSR Controller. In loss-in-weight feeder refill applications, the LSR Controller can also be interfaced with SmartConnex™ feeder controls. For systems with multiple receivers, microprocessor-based controls or a range of PLC control solutions are available, and these can also be integrated into feeder control systems.
Download Product Specification Sheets
Video: P100 Vacuum Sequencing Central Receiver
Do you have any further questions?
Previous page
Next page
Previous page
Next page
Address: No.69 Yong Hong Road, Hongqiao Green Valley Plaza, Block G, 4th Floor, Rooms 4065/4131, Minhang District, Shanghai 201106
Copyright © 2025 Shanghai Xieke Mechanical & Electrical Equipment System Engineering Co., Ltd.
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Steco Process Equipment & Systems Co., Ltd.
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry, no matching items were found.
CSS / JS 文件放置地